Mastercook Dishwasher Manuel d'utilisateur télécharger pdf (Page 54)

26

• POOR WASHING RESULTS

Problem Possible

C

auses What to do ?

Food traces, deposits, “sand

grains” in the glasses

- Items poorly arranged (mas-

ked by another larger item or

situated underneath it, items

nested or jammed together).

- Upper rotor blocked by cutlery

or a dish etc.

- Filter poorly locked and lifting

during washing.

- Micro filter screen clogged.

- One or more holes in the rotor

blocked.

- Arrange the items properly.

Use the most appropriate

areas and accessories for each

type of item (see instructions).

- Check that the rotor rotates

freely (gauge wire). Set the

basket in the high position if

necessary.

- Check the filter’s facing and that

the filter is locked in place (push

it in fully, turning it to the right)

.

- Remove all, the filters and

clean them (in warm water),

including the micro filter’s

screen (once a month).

- Remove the rotor by turning

the lever a quarter of a turn and

clean it under the tap (do not

use any tool that could damage

the holes). Re-install the rotor.

Traces of grease - Detergent dose too low; ineffi-

cient detergent ; stale product.

- Inappropriate programme

(temperature too low; duration

too short).

-

Increase the dose ; try another

detergent.

- Select a programme with a

higher temperature.

Problem Possible

C

auses What to do?

The appliance will not restart - Door opened during a

washing cycle.

- Wait for the time delay to end

(controlled internally by the

appliance).

The appliance does not drain

(Cf. table fault d02).

- The cover has not been remo-

ved from the sink’s U-bend.

- Drain hose kinked.

- Filters totally blocked.

- Pump blocked.

- Remove the cover.

- Check the drain hose line

behind the machine is OK.

- Remove and clean the filters

and the drain.

- Initiate a Soaking programme If

the fault persists, call a technician.

The appliance will no longer

function (see table, fault 14).

- installation of non-compliant drai-

nage system: drainage too low

down or pipe pushed too far in.

- siphoning: the appliance is

emptying as the same time as

it is filling up.

- filter system clogged

- adhere to the drainage tube

installation dimensions.

- Cleaning the filters

EN

14 / IF OPERATING ABNORMALITIES OCCUR

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 60

Commentaires sur ces manuels

Pas de commentaire